Publicidad
Continuous steam
Temperature selection
follow. If there is no label with instructions, but you know the type of material, follow the instructions below.
at a lower temperature.
reaches the new temperature.
Filling the boiler during use
If the tank remains without water, you will notice a vibration and a louder noise. Turn off the appliance by pressing the switch
Warning!
water.
Warning!
Insert the plug into the electrical outlet and turn on the appliance again.
If the appliance is not switched off promptly, overheating of the pump could cause a momentary stoppage of the appliance.
resumes normal operation.
Dry ironing
Dry (that is, steam less) ironing is obtained by plugging in the appliance, turning on the iron by means of switch (L), and
setting thermostat knob (H) on the desired temperature. Do not press the steam button.
vertical ironing
Put the curtain or fabric in the position you want to iron it vertically and press the steam button.
Warning!
Do not iron fabrics held by other people.
After ironing
Turn off the appliance by pressing the switch (L). Remove the power cable from the socket-outlet. Replace the power cord
and the iron-boiler connecting cable in the cord storage compartment (N). Let the iron cool down on its stand, taking care
not to touch the power cables and connection with the hot parts of the appliance.
SUGGESTIONS
Divide the articles to be ironed according to the types of material: wool with wool, cotton with cotton, etc
lower temperatures and move on to those which require progressively higher temperatures. If the material is made up of
the temperature for synthetic fabrics.
). Wait for the indicator lamp (I) of the
) (see table) without steam, that is,
).
13
Publicidad
