Sony KP-48V75 Manual De Instrucciones página 6

St ep 2: Hookup
Although you can use either an indoor or outdoor
antenna with your projection TV, we recommend that
you connect an outdoor antenna or a cable TV system
to get better picture quality.
Connect ing an ant enna
Connect your antenna cable to the VHF/UHF antenna
terminal. If you cannot connect your antenna cable
directly to the terminal, follow one of the instructions
below depending on your cable type.
A
75-ohm coaxial cable
• VHF only
or
• VHF/ UHF
or
• Cable
B
300-ohm tw in lead cable
• VHF only
or
• UHF only
or
• VHF/ UHF
75-ohm coaxial cable
C
• VHF
and
• UHF
300-ohm tw in lead cable
Not es
• Most VHF/UHF combination antennas have a signal splitter.
Remove the splitter before attaching the appropriate connector.
• If you use the U/V mixer, snow and noise may appear in the
picture when viewing cable TV channels over 37.
6
-EN Get t ing St art ed
Downloaded from: https://www.usersmanualguide.com/
(Rear of projection TV)
(Rear of projection TV)
Antenna connector
(Rear of projection TV)
EAC-66 U/ V mixer
(not supplied)
Connect ing an ant enna/cable TV
syst em w it hout a VCR
To cable or ant enna
To cable box
If your cable company requires you to connect a cable
box, make the connection as follows:
To cable box and cable
VHF/ UHF
VHF/ UHF
Pay cable TV systems use scrambled or encoded signals
requiring a cable box* in addition to the normal cable
connection.
* The cable box will be supplied by the cable company.
Not e
VHF/ UHF
• You cannot watch the signal through an AUX connector as a
window picture.
To cable and ant enna
Not e
• Do not connect anything to the TO CONVERTER connector in
this case.
Cable
Cable
IN OUT
Cable box
Cable box
75-ohm coaxial
cable (not supplied)
CATV cable
CATV cable
Antenna cable
(Rear of projection TV)
VHF/ UHF
(Rear of projection TV)
VHF/ UHF
(Rear of projection TV)
AUX
TO
CONVERTER
VHF/ UHF
(Rear of projection TV)
AUX
TO
CONVERTER
VHF/ UHF