Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
enGliSH
DioDe teSt
1. Insert RED test lead into VΩ jack
jack
2. Touch test leads to diode. A reading of 200-700mV on display
indicates forward bias, OL indicates reverse bias. An open
device will show OL in both polarities. A shorted device will
show approximately 0mV.
Battery teSt
1. Insert RED test lead into VΩ jack
COM jack
or 9V battery test setting.
2. Connect BLACK lead to negative, and RED lead to positive
terminal of battery.
3. Measure voltage on display, batteries in good condition should
be within approx. 10% of rated voltage.
Data HolD
Press Data Hold button
Press again to release the display and return to live measuring.
10
MM300-1390109ART.indd 10
operatinG inStrUctionS
, and rotate function selector switch
4
Black lead
, and rotate function selector switch
4
Black lead
Dwg Name: MM300-1390109ART
Dwg No: 1390109
ECO No: 20617
Pkg Dwg Ref: 1290186
Color Reference: N/A
and BLACK test lead into COM
5
Red lead
and BLACK test lead into
5
Red lead
to hold the measurement on the display.
6
Rev: E
to the
setting.
2
to the 1.5V
2
9/21/2015 2:48:06 PM
Publicidad
