Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
enGliSH
connectinG teSt leaDS
Do not test if leads are improperly seated. Results could cause
intermittent display readings. To ensure proper connection, firmly
press leads into the input jack completely. Lead guard should be
flush with the meter's faceplate.
teStinG in cat iii / cat iV meaSUrement locationS
Ensure the test lead shield is pressed firmly in place. Failure to use
the CAT III / CAT IV shield increases arc-flash risk.
teStinG in cat ii meaSUrement locationS
CAT III / CAT IV shields may be removed for CAT II locations. This
will allow testing on recessed conductors such as standard wall
outlets. Take care not to lose the shields.
6
MM300-1390109ART.indd 6
operatinG inStrUctionS
5/32"
(4 mm)
Dwg Name: MM300-1390109ART
Dwg No: 1390109
ECO No: 20617
Pkg Dwg Ref: 1290186
Color Reference: N/A
.7" (18 mm)
Rev: E
ac Vol
1. Inse
2. Mea
note:
NO GAP
Dc Vol
1. Inse
2. Mea
note:
reading
is norm
the me
note:
9/21/2015 2:48:03 PM
COM
high
suc
mea
COM
high
suc
mea
Publicidad
