Kärcher K 3.550 Manual página 15

Operation
Description of the Appliance
These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on Page 2
1 Coupling element for water connection
2 High pressure hose
3 Quick coupling for high pressure hose
4 Water connection with integrated sieve
5 Appliance switch "0/OFF"/ „I/ON"
6 Dosage regulator for detergent
7 Transport handle
8 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
9 Storage for high-pressure hose
10 Storage hook for mains connection cable
11 Mains cable with mains plug
12 Storage for accessories
13 Plug 'n' Clean detergent bottle with
locking lid
14 Wheels
15 Trigger gun
16 Lock trigger gun
17 Key to detach the high pressure hose
from the trigger gun
18 Spray lance with pressure regulation
(Vario Power)
19 Spray lance with Dirtblaster
Special accessories
Special accessories expand the possibilities of
using your appliance. Please contact your
KÄRCHER dealer for further information.
All manuals and user guides at all-guides.com
EN
Before Startup
Mount loose parts delivered with appliance
prior to start-up.
Install wheels
 Illustration
Push the wheels into the intake and se-
cure with the enclosed plugs, watch for
positioning of plug.
Install the transport handle
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
 Illustration
Slide the transport handle into the guide
and secure it with 2 screws.
Install the dosage regulator for
detergent
You will need the 2 included screws as well
as a Philips screwdriver PH 2.
 Illustration
Insert both detergent hoses onto the
hose fittings.
Install the dosage regulator and con-
nect using 2 screws.
Note: During installation you must
make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.
Connect the high pressure hose to the
hand spray gun
 Illustration
Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
Check the secure connection by pulling
on the high pressure hose.
Water supply
Warning
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA. Water
flowing through a system separator is con-
sidered non-drinkable.
– 6
15