STAMOS S-PLASMA50U Manual De Instrucciones página 13

This User Manual has been translated for your convenience using machine translation. Reasonable efforts have
been made to provide an accurate translation; however, no automated translation is perfect nor is it intended
to replace human translators. The official User Manual is the English version. Any discrepancies or differences
created in the translation are not binding and have no legal effect for compliance or enforcement purposes. If
any questions arise related to the accuracy of the information contained in the User Manual, please refer to the
English version of those contents which is the official version.
Symbols
Read the manual.
Recyclable product.
The product meets the requirements of relevant safety standards.
Wear protective clothing protecting the whole body.
Caution! Wear safety gloves.
Wear safety goggles
Use safety shoes.
Caution! Hot surface – risk of burns!
Caution! Risk of fire or explosion.
Caution! Harmful fumes, danger of poisoning. Gases and fumes can be hazardous to health.
Use a welding mask with an appropriate degree of filter blackout.
CAUTION! Harmful electric arc radiation
Do not touch live parts
The figures in this manual are illustrative only and may vary in some details from the actual appearance of the equipment.
CAUTION! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury or death.
The term "equipment" or "product" in the warnings and instructions refers to the:
Plasma Cutter
1. OPERATING SAFETY
1.1. GENERAL NOTES