Publicidad
Idiomas disponibles
Idiomas disponibles
USE
1. Attach suitable pressure piece for the upper valve spring
carrier's diameter to the compressor.
2. Depending on the diameter and overall length of the spring,
you might want to mount a pressure piece on the valve end
for compensation, also. The diameter of this second pressure
piece is not significant.
3. Adjust valve-sided compressor brace so that there is enough
tensioning space left.
4. Tighten the compressor with the toggle until there is enough
space for the disassembly of the feather keys.
5. The valve keys can now be removed through the slots in the
pressure piece.
6. For disassembly or release of the valve spring, turn the
spring-sided compressor brace counter-clockwise until the
valve spring can be removed.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
NOTES
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
