ADE MV304600 Serie Manual De Instrucciones página 39

Troubleshooting
Problem
The scale does not
1
work.
The display 4 is blank.
The weight display is not
stable.
The weighing result is
clearly wrong.
The display shows "Err".
The display shows "Lo".
Dok./Rev.-Nr. MV304600-221025-Rev001-en
Possible causes
The scale is not switched
on.
The batteries are
3
depleted.
You did not tap your foot
firmly enough on the
weighing platform
The scale has switched off.
The scale is exposed to
vibrations.
The scale is disturbed by
electromagnetic fields from
other equipment or static
charges.
The scale is not on a level
surface.
The scale is exposed to
temperature conditions
that are outside the per-
missible range.
The scale is disturbed by
electromagnetic fields from
other equipment or static
charges.
The weight on the scale
exceeds the maximum
weighing capacity of 100 kg.
The batteries are depleted. Insert new batteries.
Solution
Switch on the scale.
Insert new batteries.
Tap your foot more firmly
on the weighing platform.
.
5
Switch on the scale again.
Avoid vibrations or relocate
the scale.
Turn off the equipment
near the scale or relocate
the scale.
Place the scale on a level
surface.
Only operate the scale
within the permissible tem-
perature conditions.
Turn off the equipment
near the scale or relocate
the scale.
Remove the item from the
scale.
Restart the scale if neces-
sary.
Troubleshooting
39