Publicidad
Idiomas disponibles
Idiomas disponibles
20 /20
When the grip heater does not operate normally, check the following
items, and consult your SUZUKI Dealer from whom you bought the
product.
・ Grip heater does not operate. Or it can not be adjusted.
1. Is the grip heater switch indicator blinking?
2. Has the engine started?
3. Is the grip heater switch set on the position between
LEVEL1 ⇔ LEVEL3?
・ Grip heater temperature is too low or too high.
1. Have you adjusted the grip heater switch to be set between
LEVEL1 ⇔ LEVEL3?
2. When the temperature is too high, set the switch on LEVEL1
or OFF, or wear a thick pair of gloves.
・ The grip heater may perform/feel differently depending on the location.
1. This is no failure.
・ Grip heater switch indicator is blinking.
1. Too low battery voltage.
Recharge the battery fully or replace the battery with new one.
Even if the grip heater switch is turned off, when battery voltage
becomes low, the indicator blinks.
Handling
precautions
Do not use a high-pressure washer to wash your motorcycle, as
it can cause the grip heater to fail.
GENUINE SUZUKI ACCESSORIES
Publicidad
