Publicidad
Idiomas disponibles
Idiomas disponibles
Using the refrigerator
Displays
1
Main display control (located on drawer door)
When the power is on for the first time, icons will be
semibright, fully displayed and scrolling from left to right.
Then icons will be fully lighted for 3 seconds. At the same
time, the start-up bell will ring, and then the display will en-
ter normal operation. When the refrigerator is energized
for the first time, the temperature of refrigerator, freezer
and flex drawer will be set at 39°F, 0°F and 37°F respec-
tively.
Under normal conditions, if there is no door opening action
and no pad is pressed for 30 seconds, the display will be
locked, and will turn off after 30 seconds at locking status.
When the display off, if any pad is pressed, then it will turn
on.
Lock and unlock
In the unlock state, press and hold the locking pad for 3 sec-
onds to enter the lock state, the locking buzzer beeps.
In the lock state, press and hold the locking pad for 3 seconds
to unlock. The buzzer beeps.
Temperature setting of refrigerator compartment
Press the refrigerator pad to select the refrigerator temperature
zone. Then press the "-" and "+" temperature regulation pads to
set the temperature for the fresh food compartment. When
pressing the "-" pad once, the temperature will decrease by
1°C/1°F. After the temperature reaches 1°C/34°F, the "-" pad
will be invalid no matter how it is pressed.
When the "+" pad is pressed once, the temperature will incre-
ment by 1°C/1°F. After the temperature reaches 7°C/44°F, the
"+" pad will be invalid no matter how it is pressed.
Temperature setting of the Flex Drawer
Press the FLEX drawer pad to select temperature shift zone.
Press the temperature shift pad again to adjust the temperature
of the FLEX drawer.
When the temperature shift pad is pressed once, the tempera-
ture will be increased by 1 gear, when the temperature reaches
the WINE setting (4th gear), press the temperature shift key
again, the temperature will return to MEAT (1st gear).
10
2
Distribution display and control
When the refrigerator is energized for the first time, the
distribution display and control will turn on for 3 seconds
and then it enters the normal operation. Water dispensing
function is the default option when the refrigerator is ener-
gized for the first time.
If no pad is pressed after 30 seconds, the display enters the
locking state automatically.
The temperature range for the fresh food compartment is 1°C
(34°F) ~ 7°C (44°F). The setting will take effect after locking.
The corresponding temperature settings for each gear are
MEAT -1°C (30°F), BEV. 1°C (34°F), DELI 3°C (37°F) and
WINE 5°C (41°F). The settings will take effect after locking.
MEAT
BEV.
DELI
WINE
Publicidad
