Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions
Adjustment of cantilever rack
The cantilever rack can be adjusted to the proper height as re-
quired by food.
Adjust the cantilever rack by following the arrows as shown in
the illustration.
Raise the rack upward first and then take it out by tilting it up-
wards. During installation, place the upper end of the fixed leg
into one of the upper slots on the support iron first, and then
place the lower end of the fixed leg into the third slot on the
lower part of the support iron.
Upper end of fix leg
Bottom end of fix leg
Slot
Installing the filter
1. When the refrigerator is used for the first time, press down
the marks on both sides of the filter cover by hand and open
the filter cover downward.
2. Rotate the dustproof plug counterclockwise and remove it.
Height adjustment and cleaning of door-mounted bottle
rack
Raise the bottle rack in the direction shown by the arrow, hold it
with both hands and take it out in the direction shown.
After cleaning, you can install the rack in the inverse order and
you can also adjust the height of the rack.
3. Remove the exterior package of the filter. Turn the filter
clockwise and press the filter element, and install the filter el-
ement at the joint position of the refrigerator filter until the fil-
ter element does not rotate.
4. When the filter indicator light in the display panel is on, it
prompts to replace the filter element. The method of remov-
ing the filter element is the same as that of removing the
dustproof plug.
5. The filter is recommended to be replaced every half a year.
19
Publicidad
