Publicidad
Idiomas disponibles
Idiomas disponibles
Using the refrigerator
ECO mode
Press the ENERGY SAVING pad to enter the ECO mode.
The indicator light will turn on. The QUICK-FREEZING mode
is cancelled. The QUICK FREEZING is set at -14°C and the
fresh food compartmente temperature at 7°C.
Press the ENERGY SAVING pad again to exit the ECO
mode, the backlight of the pad will turn off, and the tempera-
ture of freezer and fresh food compartments will return to the
previous set temperature.
Anti-condensation heater strip
The anti-condensation heater strip can be turned on and off
via a combination of pads.
Press the ENERGY SAVING and FREEZER TEMP pads at
the same time for 3 seconds, the Fahrenheit symbol will
blink, it will take effect by pressing the locking key, and the
anti-condensation heater strip will be turned off.
When the anti-condensation heater strip is off, press the EN-
ERGY SAVING and FREEZER TEMP pads at the same time
for 3 seconds, the Fahrenheit symbol will stop blinking, it will
take effect by pressing the locking key, and the anti-conden-
sation heater strip will be turned on.
Error codes
When there is an error, the display shows the error code (the
display cycles after locking).
The buzzer sounds an alarm. Press any pad when unlocking
or locking, the alarm turns off. After the corresponding sen-
sor/ice maker error is eliminated, the display will clear the
corresponding error code.
Error code
Error description
EH
Humidity sensor failed.
F5
Refrigerator ice maker fails to turn over ice.
F4
The sensor at the bottom of refrigerator ice maker fails.
CC
The defrosting sensor in ice maker chamber fails.
C9
The sensor in ice maker compartment fails.
CA
The communication between main control and ice maker boards failed.
F6
Initialization of refrigerator ice maker failed.
E0
Initialization of freezer ice maker fails.
E1
The temperature sensor in the fresh food compartment failed.
E2
The temperature sensor in the freezer compartment failed.
E3
Sensor of the Flex Drawer failed.
E4
Frosting sensor of fresh food compartment failed.
E5
Frosting sensor of freezer compartment failed.
E6
Communication between display and main control boards failed.
E7
Ambient temperature sensor failed.
12
The mode will take effect after locking.
The on and off anti-condensation heater strip is used for in-
spection and maintenance convenience. The user should not
easily turn off the anti-condensation heater strip, as it will
cause the risk of condensation.
When any door is opened for more than 2 minutes, the
buzzer will sound an alarm. When the door is locked/un-
locked, press any pad to turn off the alarm, or close all doors,
the alarm sound will be muted.
Publicidad
