Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions
Remove refrigerator doors
1. Use a screwdriver to remove the 2 screws, then remove the
upper hinge cover of the left door. See Figure 1.
2. Use a screwdriver to loosen the 3 screws and 1 grounding
screw fixing the upper hinge, then remove the plug terminal
and the left door. See Figure 2.
3. For the right door, there is no grounding screw. Follow the
rest of the steps for the left door.
4. For a drawer, first remove the security block of the stopper by
hand. See Figure 3.
5. Press the lock buttons of both the left and right glide rails and
slowly pull the drawer out. See Figure 3.
Remove the variable temperature drawer (Flex Drawer)
1. Pull the variable temperature drawer to the maximum stroke,
remove harness cover with screwdriver or electronic runner
for screw fixation, then remove the harness cover.
2. Remove harness using a screwdriver or electronic runner for
fixation and clamping with screw, then unplug the connecting
terminal.
3. Remove the screw on the left and right slideway support us-
ing a screwdriver or electronic runner. It is best that one per-
son hold the drawer against falling in the process.
4. Lift the drawer to a certain angle with both hands and pull
out.
Remove freezer drawer
1. Remove the screw on the left and right slideway support us-
ing a screwdriver or electronic runner. It is best that one per-
son hold the drawer against falling in the process.
2. Lift the drawer to a certain angle with both hands and pull
out.
Screws
Disassembly of freezer drawer
21
Publicidad
