Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions
Connecting the water line to a drinkable water source
If your water line is NOT drinkable, please add an external wa-
ter filter.
Installing door handles
Precautions should be taken to prevent fall of the handle caus-
ing personal injuries.
Installation procedure
1. Take out bolt (1) from the accessories bag, then use a
Phillips screwdriver to fix the bolt 1 into the bolt hole (2) of re-
frigerator doors. See Figure 8.
2. Place the handle on the door using bolt (1) and make sure
the handle contacts the door surface closely. See Figure 9.
3. Fix the handle by rotating the handle screw (3) to the end,
then shake the handle to verify that it is firmly fixed.
4. Place the cap (4) on the handle screw hole to complete this
installation.
Before using the refrigerator
Before operation, remove all packing materials, including
bottom foam pads and tape inside the refrigerator; tear off
protective film from doors and refrigerator body.
Before turning the refrigerator on, keep it still two hours be-
fore connecting it to power supply.
18
Figure 8
If you must repair or disassemble the water line, cut off the
plastic tubing to make sure you get a snug, leak-free connec-
tion.
List of tools to be provided by the user:
Phillips screwdriver
1. Bolt
2. Bolt hole
Before placing fresh or frozen foods, the refrigerator should
run for 2-3 hours, or for more than 4 hours during summer
when the ambient temperature is high.
Inner hexagonal wrench
Hole
Screw
Figure 9
3. Handle screw
4. Screw hole cap
Publicidad
