Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL SAFETY RULES
Do not overreach. Keep proper footing and balance at all times.
e)
This enables better control of the power tool in unexpected situations.
f)
Dress properly. Do not wear loose clothing or jewelry. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewelry or long hair can be caught in moving parts.
g)
If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly
used. Use of these devices can reduce dust-related hazards.
4)
Power tool use and care
a)
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off.
b)
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
Disconnect the plug from the power source before making any
c)
adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool
accidentally.
d)
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
Maintain power tools. Check for misalignment or binding of
e)
moving parts, breakage of parts and any other condition that may
affect the power tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean. Properly maintained cutting
f)
tools with sharp cutting edges are less likely to bind and are easier to
control.
Use the power tool, accessories and tool bits etc., in accordance
g)
with these instructions and in the manner intended for the
particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous
situation.
5)
Service
Have your power tool serviced by a qualified repair person using
a)
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
continued
5
Publicidad
