Publicidad
Idiomas disponibles
Idiomas disponibles
CRYO BAT
USE OF THE APPLIANCE
d. Use your other hand to press the appliance downwards in correspondence of the mark (X)
located on the lower metal ring; the appliance starts and the LEDs (13) in the tank (11) switch
on.
e. Move the glass by rotating and/or raising it and lowering it until the desired result is obtained.
The time necessary for "cooling" of the glass may vary from a couple seconds up to a max of
10 seconds in function of the type of glass, of the load of the cylinder, of ambient temperature
and of the desired result.
Do not raise the glass beyond the upper part of the supply nozzle to
avoid that the jet of CO
Danger of burns !
Handle the glass with care. Cutting hazard !
f.
Supply stops and the LEDs (13) switch off when pressure is released.
may enter in contact with hands or face.
2
OK !
(Fig. F10 - F11)
NO !
EN
F9
EN - 11
Publicidad
