Sime MURELLE EQUIPE 220 BOX Manual De Instrucciones página 44

2 INSTALLATION
Installation. is. permanent. and. must.
exclusively.be.performed.by.specialised.
and. qualified. personnel,. following. all.
the. instructions. and. provisions. inclu-
ded.in.this.manual..Current.regulations.
must.also.be.met.
2.1 SUPPLY (fig. 4)
"MURELLE EQUIPE 110 BOX" heat.
modules,. inter-connectible. by. flange,.
are. supplied. with. an. external. pre-pain-
ted. zinc-coated. laminate. case.. They. are.
complete. with. supply/return. water. and.
gas. manifolds,. external. temperature.
probe. kit,. cascade. supply. and. RS-485.
code. 8092250. board. connection. cable..
Available.separately:
–. Tubes. connecting. the. hydraulic. sepa-
rator. kit. code. 8101532. for. modules.
NOTE: move the flanges fixed to the box wall with screws and place them in the
location shown in the figure, depending on the type of hydraulic separator used.
44
"220-330 BOX". and. code. 8101533. for.
modules."440-550 BOX"
–. Double.box.(size:.1100.x.790.x.1600).for.
hydraulic.separator.code.8101527
–. Hydraulic. separator. kit. code. 8101552.
for.modules."220-330 BOX".and.code.
8101553.for.modules."440-550 BOX"
–. Polypropylene.exhaust.manifold.kit.for.
indoor. installation. (purposely. treated.
to. resist. weathering. when. installed.
outdoors):
. code.8102530.for."220 BOX" module
. code.8102531.for."330 BOX" module
. code.8102532.for."440BOX" module
. code.8102533.for."550 BOX" module
–. Exhaust. terminal. code. 8089530. for.
outdoor.installations.
To.electrically.connect.the.modules.and.
to.assemble.the.exhaust.for.indoor.or.ou-
tdoor.installations,.see.points.2.6,.2.7.and.
2.10.in.this.manual.
DOUBLE BOX FOR HYDRAULIC SEPARATOR
BOX CONTENITORE DOPPIO PER COMPENSATORE
AND TUBES CONNECTING code 8101527
IDRAULICO E KIT SICUREZZE INAIL cod. 8101527
FOR MURELLE EQUIPE 220-330 BOX
PER "MURELLE EQUIPE 220 - 330 BOX ErP"
1100
DOUBLE BOX FOR HYDRAULIC SEPARATOR
BOX CONTENITORE DOPPIO PER COMPENSATORE
AND TUBES CONNECTING code 8101527
IDRAULICO E KIT SICUREZZE INAIL cod. 8101527
FOR MURELLE EQUIPE 440-550 BOX
PER "MURELLE EQUIPE 440 - 550 - 660 BOX ErP"
1100
2.2 INSTALLATION
2.2.1 Indoors
"MURELLE EQUIPE 220-330-440-550
BOX". heat. modules. can. be. installed. in.
boiler. rooms. whose. size. and. require-
ments.meet.current.regulations.
Furthermore,. vents,. with. surface. areas.
at. least. . 3.000. sq.. cm. . or. . 5.000. sq.. cm.
for. gas. with. density. over. 0.8,. must. be.
installed. in. the. outer. walls. for. room.
ventilation..
2.2.2 Outdoors
"MURELLE EQUIPE 220-330-440-550
BOX".heat.modules.can.also.be.installed.
outdoors. with. the. specific. exhaust. for.
single.module.code.8089530.
396
790
396
790
Fig..4