Publicidad
Idiomas disponibles
Idiomas disponibles
NEBULISER
• Detach the tube from the nebuliser.
• Detach the mouthpiece from the nebuliser.
• Make sure that all residual volume is removed from the
nebuliser.
• Dismantle the nebuliser into its individual parts.
• Carefully pull the blue exhala-
tion valve out of the slot in the
mouthpiece. The valve must
still be attached to the
mouthpiece.
Cleaning
The connection tube cannot be cleaned or disinfected. Re-
garding care of the connection tube, follow the instructions
in the corresponding section [see: Care of the connection
tube, page 34].
ELASTIC BAND
• Clean the elastic band as necessary with warm drinking wa-
ter and a little dishwashing liquid.
NEBULISER AND MASK
• Briefly rinse all parts used in running drinking water
beforehand.
• Place all disassembled
components in warm drinking
water with a little dishwashing
liquid for about 5 min.
• Rinse off all parts thoroughly in drinking water.
• Shake the water out of all of the parts.
– 29 –
Publicidad
