Publicidad
Idiomas disponibles
Idiomas disponibles
MEMORY FUNCTION
Recalling Measurements in Memory
This monitor stores and recalls up to 60 readings per user. These measurements
can be shared with your physician or trained healthcare professional.
This unit can recall:
•
the average of the last 3 measurement
•
all morning measurements (5:00 a.m. thru 9 a.m.)
•
all evening measurements (6 p.m. thru 8 p.m.)
•
all measurements in a given memory bank sequentially
1.
When the unit is OFF, press and release the
M1 or M2 button to select the memory bank
for review.
2.
The unit will first display the average of the
last three measurements, Fig 1.
Press the M1 or M2 button again to display
3.
the average of all AM measurements, then PM
measurements.
Press M1 or M2 again to begin scrolling
4.
through all saved measurements.
Measurements will appear on the display from
most current to oldest; the memory number will
appear flashing at the bottom of the screen
next to the measurement that was taken.
5.
All results for a given measurement will
display, including measurement results, pulse
rate, Hypertension Indicator and Irregular
Heartbeat alert (if applicable). The date/time
stamp is at the bottom of the display, Fig 2.
22 • ENGLISH
Fig. 1
Fig. 2
Publicidad
