Selecline 600107632 Manual De Utilización página 10

■ The manufacturer declines all responsibility if the above safety precautions are
not observed.
■ This appliance complies with the E.E.C. Directives.
Levelling the Appliance
■ Level the appliance using the two adjustable front feet which can be screwed or
unscrewed to change the height. See Figure 2.
NOTE: If the appliance is not level and in firm contact with the floor, the doors and
the magnetic seal alignment will not be covered correctly. An unlevel appliance can
lead to excessive noise and vibration.
REVERSING THE DOOR OPENING DIRECTION
Tools required: Phillips screwdriver, flat-bladed screwdriver and an adjustable
wrench or spanner.
Notes:
■ Ensure the appliance is unplugged and empty.
■ To remove the door, it is necessary to tip the appliance backwards. Rest the
appliance on something solid so that it will not slip during the door reversal
process.
■ All parts removed must be saved as they are required to reinstall the door.
■ Do not lay the appliance flat as this may damage the coolant system.
■ This is a two-person task as it takes more than one person to handle the appliance
during assembly.
1. Prise up and lift off the top-right hinge cover. See Figure 3.
1.Remove the top right hinge cover.
1.Remove the top right hinge cover.
2. Unscrew the two bolts and take off the hinge bracket. See Figure 4.
2.Undo the screws.Then remove the 2.Undo the screws.Then remove the
hinge bracket. hinge bracket.
Shorten
10