Selecline 600107632 Manual De Utilización página 16

STORAGE
If the appliance is left empty for long periods of time, switch it off, defrost, clean, and
dry it. Leave the door open to prevent mould from developing inside the appliance.
TROUBLESHOOTING
Problem
Appliance does
not work.
Appliance freezes
too much.
The food is
insufficiently
frozen.
Heavy build-up of
frost on the door.
Unusual noises
Possible Cause
Mains plug is not plugged
in or it is loose.
Fuse has blown.
Socket is defective.
The temperature setting it
too cold.
Incorrect temperature.
Door left open for an
extended time.
A large amount of
unfrozen food was inserted
in the last 24 hours.
Door seal is not airtight.
The appliance is too near
to a heat source.
Appliance is not level.
Appliance is touching
the wall, a pipe or other
objects.
16
Solution
Insert the plug correctly.
Check and replace the fuse.
Ask an electrician to fix the
socket.
Turn the temperature to a
warmer setting.
Turn the temperature to a
colder setting.
Do not leave the door open
unnecessarily.
Temporarily use a colder
temperature.
Warm the leaking sections
of the seal with a hair dryer
(on a cool setting) and
mould them by hand until
they sit correctly.
Check the guidelines
advised in the Installation/
Location section
move the appliance away
from the heat source.
Adjust the feet.
Move the appliance or pipe
slightly.
and