Publicidad
Idiomas disponibles
Idiomas disponibles
3/ PRODUCT DESCRIPTION
1- Drawers
2- Adjustable feet
3- Hinge
4/ BEFORE FIRST USE
TRANSPORTATION INSTRUCTIONS
■ This appliance should be transported only in a vertical, upright position. The
packing as supplied must be intact during transportation.
■ Do not use the door handles when carrying the appliance.
UNPACKING
1. Unpack all parts.
2. Immediately after unpacking, check for completeness and any damage sustained
during shipping. If your package or the power cable is damaged or incomplete,
do not connect the appliance, keep the packaging material and immediately
contact our After-Sales department or the retailer where you purchased the
appliance.
INSTALLATION
WARNING!
■ Make sure the power cable is not caught under the appliance during and after
moving it, to avoid the power cable becoming cut or damaged.
■ RISK OF ELECTRIC SHOCK! Protect the appliance from moisture. Do not install
the freezer in a humid place to avoid rust on the metal parts. Do not splash water
on the interior or exterior of the appliance, as this may weaken the insulation and
result in an electric shock or fire.
■ If the freezer is installed in cold unheated areas, such as a garage, condensation
may form on the outer surfaces. This is quite normal and is not a fault. Wipe off
any condensation with a dry cloth.
■ When positioning your appliance take care not to damage your flooring, pipes,
wall coverings, etc.
IMPORTANT!
■ It is advisable to wait at least four hours before connecting the appliance. This
allows the fluids to balance. For example, the oil flows back into the compressor.
■ The appliance must not be located close to radiators or cookers.
■ Ensure that the mains plug is accessible after installing the appliance to ensure
the appliance can easily be disconnected at any time.
■ Do not attempt to sit or stand on top of the appliance as it is not designed for
such use. You could injure yourself or damage the appliance.
4- Thermostat adjustment knob
5- Door
6- Gasket
8
Publicidad
