Publicidad
Idiomas disponibles
Idiomas disponibles
alternate through MIN. and MAX. fan
speed options. The indicator light
beside the FAN speed option will
illuminate, identifying the fan speed
selected.
Timer:
Press the "TIMER" keypad to activate
the "auto start/auto stop" timer
function.
Auto start/stop programs can be set
from 0~12 hours. Each depression of
the "TIMER" keypad will increase the
selected time in 1 hour increments.
Swing (some models):
Press the "SWING" keypad ( >
9000Btu/h models only) to activate
the automatic air swing (oscillation)
feature. The indicator light adjacent
to the "SWING" keypad will
illuminate, identifying to the selected
mode is operational. The vertical
louvers will oscillate back and forth
(side to side) automatically sweeping
air alternately for comfortable
cooling/heating. To stop the air swing
feature, press the "SWING" keypad
again, the indicator light adjacent to
the keypad will go off.
Press the "SWING" keypad for 2
seconds will activate the SLEEP
mode which can reduce noise
creating a comfortable sleeping
environment.
When the SLEEP mode is activated,
the indicator light beside the
"SLEEP" function will illuminate.
(See sleep mode)
37
All manuals and user guides at all-guides.com
Press and hold the
Press the
"SWING" keypad for
"SWING"
2 seconds or use the
keypad to
remote control to
activate the
activate the "SLEEP"
automatic air
feature.
Sleep:
Press and hold the "SWING" keypad
for 2 seconds or use the remote
control to activate the "SLEEP"
feature ( >9000Btu/h models only) .
Press and hold the "SWING" keypad
or use the remote control again for 2
seconds to deactivate the "SLEEP"
feature. For units ( <9000Btu/h
models) without "SWING" feature,
use the remote control to activate the
"SLEEP" feature. In the Cooling
mode, the cooling temperature set
point will increase 1 °C per hour after
the "SLEEP" mode is selected. Two
hours later, the set point will continue
at this temperature and the fan motor
will remain on LOW speed. In the
Heating mode, the heating
temperature set point will decrease 1
°C per hour after the "SLEEP" mode
is selected. Two hours later, the set
point will continue at this temperature
and the fan motor will remain on LOW
speed. Using the "SLEEP" mode will
reduce noise creating a comfortable
sleeping environment.
Note: When activating the SLEEP
mode in AUTO mode, the set
temperature will not change over
time.
Vent. control
For maximum cooling efficiency,
CLOSE the vent, this will allow
internal air circulation. To discharge
stale air, OPEN the vent.
38
Publicidad
