Hitachi PC-ARFP1E Manual De Instalación Y Funcionamiento página 56

MENU OPERATION
1 Select "Power Saving Setting" from the "Menu" screen and
press "OK".
The "Power Saving Setting" screen will be displayed.
Menu
OK
/
?
OK
/
?
2 Select "Detailed Setting" with " " or " " and press "OK".
When using a main controller, the "Power Saving
-
Detailed Setting" screen will be displayed. Refer to (3)
below.
When using a sub controller or if the indoor unit does
-
not support power saving, the "Detailed Setting" of the
"Intermittent Control" will be displayed.
Refer to (4) below.
Power Saving Setting
OK
/
?
OK
/
?
3 Select "Intermittent Control" with " " or " " and press "OK".
The detailed setting screen of the intermittent control will be
displayed.
Detailed Setting
OK
/
?
Detailed Setting of Intermnt Control.
OK
/
?
8.6 OPERATION NOISE REDUCTION
This function is used to control the operation noise of the
outdoor unit, by partially reducing its nominal capacity.
?
N O T E
• The "Main/Sub-Remote" display in "9.1 Current Setting" in the "9 Help
Menu" cannot be set if the indication is "Sub" or "−−".
• Depending on the operation noise reduction setting below, it is
possible to change the function setting to reduce the noise of the
outdoor unit.
48 PMML0496 rev.1 - 12/2020
15:10(Fri)
Simple Timer
Reset Filter time sign.
Operation Schedule
Elevating Grille
Power Saving Setting
SEL. OK ENT.
Power saving mode Set
Detailed setting
Sel. OK Entr Rtrn
Capacity Control
Rotation Control
Intermittent Control
Sel. OK Entr
4 By pressing "
displayed : "LOW→MED→HIGH" ↔ "LOW Only" ↔ "MED
Only" ↔ "HIGH Only".
Press "OK" after selecting a setting.
OK
01
/
05
RTN.
OK
5 The setting confirmation screen will be displayed. Select
"Yes" with "
The screen will return to normal mode.
If the power saving setting is accessible, set it "ON" using
"Power Save Guide".
OK
OK
6 The setting confirmation screen will be displayed. Select
"Yes" with "
The screen will return to normal mode.
Rtrn
Setting
Not available
• The cooling/heating capacity can be decreased when using the
"Operation Noise Reduction" setting.
" or " ", the following indications will be
Intermittent Control
/ ?
Chg level
LOW MED HIGH
Select setting range of
power saving.
/ ?
Adj.
" or " " and press "OK" to confirm the setting.
Power Saving Mode Setting
/ ?
Fix power saving settings.
Cancel current power saving
settings?
Yes
/ ?
Sel.
" or " " and press "OK" to confirm the setting.
Description
Reduction to approximately
LOW
80% of nominal capacity
Reduction to approximately
MED
60% of nominal capacity
Reduction to approximately
HIGH
40% of nominal capacity
OK
Entr Rtrn
No
OK Entr Rtrn
No setting