5.2 BUTTON FUNCTIONS
The different functions are set using the backlit buttons:
Temp + serves to increase the
temperature
Temp - serves to reduce the
temperature
Heating / Cooling: used to switch the
operating mode
Boost function: this automatically sets
the power delivery to maximum, whether
heating or cooling
Function not used
Night function: the ventilation speed is
limited to a very low value to guarantee the
maximum comfort.
ON/Standby: used to start the appliance or
to set it to standby.
Automatic function: characterised by the au-
to-regulation of ventilation speed, between a
minimum and maximum setting according to
the actual difference between the ambient
temperature and the set-point .
5.3 GENERAL SWITCHING ON
To manage the appliance using the control panel, this must be connected to the power mains.
If a main switch has been fitted to the power line, this must be engaged.
- Switch on the main switch to start the system
!
BUTTONS
59