Publicidad
Idiomas disponibles
Idiomas disponibles
5.7 TEMPERATURE SELECTION
Button
Function
Use the increase and reduce buttons to set the required temperature value for the room,
which is viewed in the two digits of the display.
The adjustment range is from 16 to 28°C, with a 1°C resolution, but it is also possible to use
values outside of this scale of 5°C and 40°C (except in auto mode). Set these values for short
periods only and then adjust the setting to an intermediate value.
The control has a high degree of precision; set it to the required value and wait for the control
to make this adjustment according to the actual room temperature detected.
5.8 AUTOMATIC FUNCTION
Button
Function
Hold down the button A. The function is signalled by the relative symbol that lights up on
the display.
Ventilation speed adjustment is automatic, between a minimum and maximum value, accor-
ding to the actual distance between room temperature and the setpoint set based on a type PI
algorithm.
5.9 NIGHT FUNCTION
Button
Function
Hold down the night Function button. The function is signalled by the relative symbol that
lights up on the display.
Selecting this operating mode will limit the ventilation speed to a very low version.
5.10 BOOST FUNCTION
Button
Function
Hold down the Max Function button. The function is signalled by the relative symbol that
lights up on the display.
With this operation mode, power delivery is automatically set to maximum, whether heating or
cooling. As the room temperature reaches the set value, the ventilation slows down.
Display
20
Display
Display
Display
61
Publicidad
