Symbols - Ryobi RY252CS Manual Del Operador

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL NAME
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert Symbol
Read Operator's Manual
Wear Eye and Hearing
Protection
Keep Bystanders Away
Ricochet
Air Inlet Cover
Long Hair
Blower Tubes
Loose Clothing
Gasoline and Lubricant

SYMBOLS

MEANING
Indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation, that, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates information considered important, but
not related to a potential injury (e.g. messages relating to property damage).
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand opera-
tor's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1 as well as hearing protection when operating this
equipment.
Keep all bystanders at least 50 ft. away.
Thrown objects can ricochet and result in personal injury or property
damage.
Do not run unit if the air inlet cover becomes opened, damaged,
or unsecured in any way. Contact with rotating impeller blades can
cause severe injury.
Risk of long hair being drawn into air inlet.
Do not run unit without tubes in place.
Risk of loose clothing being drawn into air intake.
Use unleaded gasoline intended for motor vehicle use with an octane
rating of 87 [(R + M) / 2] or higher. This product is powered by a 2-cycle
engine and requires pre-mixing gasoline and 2-cycle lubricant.
EXPLANATION
5 - English