Publicidad
Idiomas disponibles
Idiomas disponibles
minutes).
The maximum timer length is 24 hours.
When the timer is over, the unit will enter into standby mode
You can also set time and temperature the same as 2-1-1 and 2-1-2.
To quit from timer mode: hold the
disappeared.
The unit will automatically return back to free normal mode afterward.
Note: Once the machine exits free program (enter the day, week program, or standby),
and then return to the free program, the unit always enters into the free normal mode
first. The original timing model will be automatically cancelled.
2.2. Running mode selecting
Press the
button to get into program selecting (Program No. start to blink).
Press
or
Then press
to confirm it.
The unit will run following the new selection program.
Note: During this period, if no buttons are pressed, the selection is automatically
completed 5 seconds later.
2.3. Day program
Day program has three kinds of working modes:
Comfort mode :(
~ 35 ℃;
Economic mode: (
35 ℃;
The temperature should be no higher than comfort temperature;
Anti-frost mode: (
If a daily program was chosen for the work program, the unit will repeat the program
every day.
to select running mode:
and program content displayed as ), Adjustable range from 10 ℃
and program content displayed as ), Adjustable range of 10 ℃ ~
and program content displayed empty), 7 ℃ is fixed.
button for 3 seconds until the
.
symbol has
47
Publicidad
