SK magic BID-S24D Manual De Instrucciones página 10

Installation
How to Install
Shutoff Valve
10 English
(rev00) BID-S24D_User_EN+MES.indb 10 (rev00) BID-S24D_User_EN+MES.indb 10
Existed
seat nuts
Bowl tank
hose
T-Shaped
Connector
Remove existing toilet seat and seat cover.
•
Loosen the under bolts and nuts.
-
Store the separated seat, seat cover and
-
other parts.
Wipe the surface on the toilet before install
-
a bidet seat.
NOTE
Scan QR code for installation
•
video.
Turn off the Shutoff Valve on the wall.
•
Push the bowl flush lever to empty the
•
toilet bowl tank.
Disconnect existing Bowl tank hose under
•
toilet bowl tank.
Be careful as water may flow from the
-
toilet bowl tank.
Don't disconnect hose from the wall valve.
-
Assemble a enclosed T-Shaped Connector
•
under the toilet bowl tank.
Connect the Bowl tank hose to the
•
T-Shaped Connector.
Be careful as water may flow from the
-
toilet bowl tank.
If excessive force may damage the parts.
-
Check the Rubber in the T-Shaped
-
Connector and Hoses when you assemble
it.
Make sure the hose is not kinked.
-
2021-06-07 2021-06-07 2:07:43 2:07:43