SK magic BID-S24D Manual De Instrucciones página 25

CAUTION
When cleaning the nozzle, do not pull it with undue force and do no force it back in.
•
Doing so may cause damage or a malfunction.
The nozzle will not retract while it is being cleaned even if you press the [POWER] button.
•
So, please press the [POWER] button after the nozzle has retracted.
Be careful not to damage the nozzle hole.
•
(rev00) BID-S24D_User_EN+MES.indb 25 (rev00) BID-S24D_User_EN+MES.indb 25
4. Use a brush to gently scrub the
nozzle.
1. Press the [POWER] button to turn off
the power.
2. Press and hold the [STOP] for about
3 seconds and the nozzle will come
out.
3. Lift the seat cover and seat up.
4. Wipe the nozzle and around it with a
brush, etc.
5. Press and hold the [STOP] for about
3 seconds and the nozzle will go in.
6. Press the [POWER] to turn the power
on.
English 25
2021-06-07 2021-06-07 2:07:45 2:07:45