SK magic BID-S24D Manual De Instrucciones página 26

When NOT in Use for a Long Time (Drain the Water)
To Prevent Freezing in Winter
1. Check if the power plug is properly plugged into an outlet.
2. When you cannot heat the inside of the bathroom, keep the connector warm by wrapping
it with cloth or insulator.
NOTE
This products operating temperature is between 32 ~ 104 ˚F (0 ~ 40 ˚C).
•
Mesh Part Cleaning
1. Turn off the Shutoff Valve on the wall.
2. Disassemble the mesh in the inlet port.
3. After cleaning with water and a brush, reassemble.
26 English
(rev00) BID-S24D_User_EN+MES.indb 26 (rev00) BID-S24D_User_EN+MES.indb 26
1. Unplug from the outlet.
2. Turn off the
3. Drain the water from the Water
Supply Hose.
•
•
Shutoff
Valve
•
.
Shutoff Valve
Remove the water in the hose
(Bowl tank hose, Water supply hose).
For toilets with water tanks, water
will flow down from the tank so
prepare a container to catch the
water. Put the removed Water Supply
Hose into the container.
Be aware that pressure in the Water
Supply Hose may cause water to
scatter when the hose is removed.
2021-06-07 2021-06-07 2:07:45 2:07:45