Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Do not damage or pinch the cables when you fold or
unfold the handle.
7.4
INSTALL THE GRASS CATCHER
16
1.
Remove the mulch plug.
2.
Remove the side discharge chute.
3.
Open the rear discharge door (7) and hold it.
4.
Hold the grass catcher by its handle (18) and
engage the hooks (16) on the door rod (17).
5.
Close the rear discharge door.
7.5
INSTALL THE MULCH PLUG
1.
Remove the grass catcher.
2.
Open the rear discharge door (7) and hold it.
3.
Hold the mulch plug (11) by its handle and fit it in
the discharge chute.
4.
Close the rear discharge door.
WARNING
17
7
18
11
English
7.6
When you use the side discharge chute,
• Do not install the grass catcher.
• Keep the mulch plug installed.
1.
Open the side discharge flap and hold it.
2.
Line up the recesses of the side discharge chute
below the pivot.
3.
Close the side discharge flap.
7.7
The machine can be set to different cutting height.
7
1.
Pull the height adjustment lever (8) rearward to
increase the cutting height.
2.
Pull the height adjustment lever forward to
decrease the cutting height.
10
INSTALL THE SIDE DISCHARGE CHUTE
CAUTION
SET THE CUTTING HEIGHT
8
Publicidad
