Picture quality
Symptom
The picture is out of
focus.
The picture is too dark.
The colors of the
picture taken indoors
are not correct.
A part of the picture is
missing.
Printer/Station
Symptom
The printer does not print. • Connection may not be correct.
Possible causes/Action
• Focus is off.
t Check the distance between the lens and the
subject and place the subject at the range within
which the focus is in.
• The camera was moved when you pressed the
release button.
t Hold the camera correctly, then press the release
button slowly.
• The lens is dirty.
t Clean the lens.
• The flash was blocked by a finger or other obstacle.
t Hold the camera correctly, and make sure nothing
blocks the flash.
• The subject was too far away.
t Take the picture within range of the flash.
• The subject was backlit.
t Use the flash.
• This is due to fluorescent lighting.
t Set the white balance correctly.
• A finger was blocking the lens.
t Hold the camera correctly, and make sure a finger
does not block the lens.
Possible causes/Action
t Check connections and rectify, if necessary.
• Either paper or ink ribbon cartridge is not loaded.
t Load the paper or ink ribbon.
55