CHAPTER 2
PREPARATION BEFORE THREADING
Thread tree
Fully insert the thread tree into the hole <A>.
After inserting the thread tree, fully extend it, and
make sure that it is secured with the stopper. Make
sure that the thread holders are directly above the
spool pins as shown.
1 Thread holder on thread tree
2 Spool pin
3 Correct position
How to use the thread spool cap
When using sewing thread spools, the thread
spool cap should be used as illustrated below.
Make sure that the spool notch is on the bottom.
1 Thread spool cap
How to use the thread net
If you are sewing with loosely spun nylon thread,
we recommend that you cover the spool with the
thread net supplied to prevent the thread from
slipping off the spool.
Adapt the net to the shape of the spool.
13