TOPRO Troja Walker2 M Instrucciones De Uso página 9

Disinfection
Disinfection must only be carried out by
authorized personnel. Please contact
your local dealer or mobility aid centre.
During disinfection sufficient protective
equipment must be worn, and the
instructions of the disinfectant manu-
facturer must be followed. The surface
of the walker should be cleaned with a
soft cloth or sponge and an approved
chemical disinfectant containing 70–80
% ethanol. We advise against disinfectant
that contains chlorine or phenol. Do not
use heat disinfection. The manufacturer
cannot be held responsible for any damage
or injuries that might occur using harmful
disinfectant/measures or disinfection
carried out by unauthorized personnel.
Inspection / Maintenance / Re-use
It is recommended that inspection and
maintenance are carried out regularly
(frequency is determined by how and
how often the walker is used). Check the
following items: Frame, screws, tubes,
handles, forearm supports, brakes, brake
parts, wheels, seat and accessories. This
also applies when the walker is to be
prepared for re-use. Please see detailed
instructions in this user manual about
maintenance of brakes and cleaning
/ disinfection. The recommended
maintenance is not a requirement, and
no preventive maintenance is required
provided that the walker is used as
intended according to this user manual.
Accessories
Back support
Tray (NB: not for size X)
Anti-slip mat for tray (NB: not for size X)
Crutch holder
Bottle holder
Stabilizer bar (size M / S)
Stabilizer bar (size X)
One-handed brake
Guiding handle for the visually impaired
Rear bag with zipper (NB: not for size X)
Name tag
Roll Resistance System (RRS), pair
Basket for oxygen bottle (only compressed, not liquid)
Material / Recycling
The walker is made of plastic-coated
aluminium tubes, plastic couplings and
material made of plastic and polyester.
There are ball bearings in all wheels
and forks. Most parts can be recycled.
Dispose the walker and its packaging
according to the applicable regulations
in your country. For information, please
contact your public authorities.
Warranty
TOPRO Troja Walker is guaranteed free
2
for faults and defects for 7 years. Damage
caused by incorrect use or parts that are
exposed to natural wear and tear (e.g.
brake block, brake cable, wheel, basket,
seat and grip) are exempt from the
7-year warranty. For repairs during the
warranty period, please contact your local
mobility shop or dealer. The warranty
is void if unauthorised spare parts or
accessories have been or are being used
on the product. The expected life span
of the product is estimated to be 10
years, if it is used in the correct manner
according to this user manual and its
safety and maintenance instructions.
TOPRO Item No.
814765
814728
814059
815358
814043
814729
814730
814026
814014
814046
814024
814032
814009
– 5 –
TOPRO Troja Walker
8 Product label
1 - Manufacturer
2 - Consult Instructions for use
(blue icon on the new label)
3 - Model name
4 - Model number
5 - Date of manufacture
6 - Serial number
7 - Global Trade Item Number
8 - GS1 DataMatrix
9 - Maximum user weight
10 - Maximum length of walker
11 - Maximum width / height of walker
12 - Intended for indoor use
13 - Medical Device
14 - CE marking (This product
conforms to Medical Device
Regualtion (EU) 2017/745)
Accessories mounted on the walker may
influence stability, we therefore advise
you to use them with care. The accessories
can be ordered separately to enable a
TOPRO Troja Walker to be customised to
2
individual needs. Contact your mobility
shop, dealer or TOPRO for an updated
overview of the accessories or visit our
homepage topromobility.com.
Art. No. User Manual: 105050 – Revision B, 2022-10
EN EN
2 NO
DE
NL
SV
DA
FI
IS
FR
IT
ES
CS