Publicidad
Idiomas disponibles
Idiomas disponibles
Keep the air vents free of obstructions.
•
Clean the unit using a damp cloth with a mild detergent.
•
Do not use any strong detergents on the plastic housing or the handle. They can be
•
damaged by certain aromatic oils, such as pine and lemon, and by solvents such as
kerosene. Moisture can also cause an electric shock hazard. Wipe off any moisture with a
soft, dry cloth.
Sharpening the Line-Cutting Blade
WARNING
1. Remove the battery pack from the trimmer.
2. Wear proper eye protection and gloves and be careful not to cut yourself.
3. Remove the line-cutting blade from the guard.
4. Secure the blade in a vise.
5. Carefully file the cutting edges of the blade with a fine-tooth file or sharpening stone, being
careful to maintain the original cutting-edge angle.
6. Replace the blade onto the guard and secure it in place with the two screws.
Storing the Trimmer
Remove the battery pack from the trimmer.
•
Clean the tool thoroughly before storing.
•
Store the unit in a dry, well-ventilated area, locked-up or up high, out of the reach of children.
•
Do not store the unit on or adjacent to fertilizers, gasoline, or other chemicals.
Keep away from corrosive agents such as garden chemicals and deicing salts.
•
Service
We recommend that all tool service be performed by a SKIL Factory Service Center or
Authorized SKIL Service Station.
26
Always protect your hands by wearing heavy gloves when performing any
maintenance on the line-cutting blade.
Publicidad
