Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INSTRUCTIONS
General Power Tool Safety Warnings
WARNING
below may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE .
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit . Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a power tool . Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet . Never modify the plug in any way . Do not
use any adapter plugs with earthed (grounded) power tools . Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators . There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not operate the machine in rain or wet conditions . Water entering the machine
may increase the risk of electric shock or malfunction that could result in personal injury.
d) Do not abuse the cord . Never use the cord for carrying, pulling or unplugging
the power tool . Keep cord away from heat, oil, sharp edges or moving parts .
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use . Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground fault
circuit interrupter (GFCI) protected supply . Use of a GFCI reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication . A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting . Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool .
Carrying power tools with your finger on the switch or energizing power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on . A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach . Keep proper footing and balance at all times . This enables better
control of the power tool in unexpected situations.
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool . Failure to follow all instructions listed
3
Publicidad
