ARDEA ONE RELIEF Manual De Instrucciones página 21

7. GENERAL DESCRIPTION
7.1 Parts view
Depending on the model chosen, the composing parts are as follow
8.1 Open the wheelchair
(FIG.2)
8.2 Backrest and seat assembly
(FIG.3)
(FIG.1)
Lift the backrest and connect the backrest
to the piston by the hinge
Lean the padded seat and backrest on the
frame, in correspondence to the Velcro strips.
Fix them with a bit pressure
1. Frame
2. Padded seat
3. Padded backrest
4. Armrest and armrest sideboard
5. Elevating legrest
6. Shoulder stopper
7. Hip stopper
8. Headrest
9. Three-dimensional headrest
(optional)
10. 60cm back wheels
8. ASSEMBLING
(FIG.2)
(FIG.3)
5