ARDEA ONE RELIEF Manual De Instrucciones página 25

11.4 Use the armrest
The armrest can be adjusted in height and width:
Adjust the height - unscrew the knob for armrest lock and adjust the height
Adjust the width - unscrew the knob under the seat and adjust the width
11.5 Use the legrest
The legrests can be adjusted in length, inclination, width and depth:
Adjust the length - Unscrew the knob on the legrests frame. Adjust the length
of the legrests according to the patient's needs. Lock the knob again.
Adjust the inclination
height and change the inclination. Lock the knob again
Adjust the width - You need a 6 mm allen wrench. Unscrew the screw under the seat
and adjust the width according to the patient's needs. Lock the screw again
Adjust the depth - Unscrew both the side knobs placed under the seat, adjust the depth according to
the patient's needs and lock the knobs again.
11.6 Use the reclining backrest
Adjust the backrest inclination by pressing the left lever on the handle bar and press the backrest
down. Release the backrest to take it back to the usual inclination
11.7 Use the seat
Adjust the inclination of the seat by pressing the right lever on the handle bar and press the seat down.
Release the seat to take it back to the usual inclination
WARNING!
These techniques are intended to be used only by experienced users. In contrary case
it is required a technical assistance
11.8 Use the sliding seat
The top of the seat can be adjusted in depth to give the patient more comfort. Unscrew the 10mm
nuts under the seat and adjust the position onwards or backwards.
11.9 Use the hip stopper
Use the hip stopper to avoid the continuous contact between lower limbs. It can be adjusted by
using the knob under the seat.
11.10 Use the rear big wheels
The rear 60cm wheels are used when self-propelled. Grasp the handrail and wheel through the
desired direction
11.11 Use the rear small wheels
The rear 30cm casters are used when wheel by an assistant through the handles
- Unscrew the side knob placed at the knees
9