Barrette Rail Instrucciones De Instalación página 8

STAIR RAIL INSTALLATION:
1.
Post Installation:
Closely follow Post Install Kit installation
instructions or use a Post Jacket on an existing
wood 4x4.
2.
Determine Spacing:
Temporarily secure a deck board (
treads to determine the spacing between the
nose of the stairs and your bottom rail (Fig. 1).
3.
Assemble Your Stair Railing Section:
a. Lock tabs on baluster/spindle must face outer
edge of routed holes in rails (Fig. 2).
b. Assemble your stair railing section by snapping
balusters/spindles in rails (Fig. 3).
4.
Stabilize Section:
Place assembled stair railing section adjacent
to mounted stair posts, leaving equal distances
from the ends of both balusters and clamp your
stair railing section to the posts (Fig. 4).
8
⁄ ⁄ ") to your stair ⁄ ⁄
5 5 5
4 4
Fig. 1
Temporary Temporary Temporary Temporary Temporary Temporary Temporary Temporary Temporary Temporary Temporary Temporary Temporary Temporary
Deck Board Deck Board Deck Board Deck Board Deck Board Deck Board Deck Board Deck Board Deck Board Deck Board Deck Board Deck Board Deck Board
Fig. 2
Lock Lock
Tabs Tabs
Fig. 3
Fig. 4
Clamp Clamp Clamp Clamp Clamp