Publicidad
30%
10%
30%
(Figure a)
Will charge first.
When the power of the paired batteries are not the same, the battery station will charge
the one with less power first.
Connect the maintenance port to the remote controller USB-A port to update the
firmware or diagnose the errors for battery station and batteries.
The battery station will automatically warm up a TB30 battery to 18° C (64.4° F) before
charging if the temperature of the battery is lower than 10° C (50° F) when inserted.
When the WB37 battery is charged at the same time, the TB30 battery charging time will
be slightly prolonged.
Battery Station LEDs Description
LED Indicators
Power Button
Solid green
Battery Status LEDs
Blinks green
Solid green
Blinking yellow
Solid yellow
Blinking red
Solid red
Battery Station Status LED
Blinking yellow
Solid red
* Connect to the remote controller, run DJI Pilot 2, and tap HMS to diagnose the error.
10%
30%
(Figure b)
Descriptions
Powered on
Charging
Charging completed
Cooling down or warming up before charging
Waiting to charge
Battery port communication error. Reinsert the battery or try another
battery port.
Battery error*
Updating battery station firmware
Battery station error*
10%
30%
20%
(Figure c)
2022 DJI All Rights Reserved.
©
40%
5
Publicidad
