Publicidad
Idiomas disponibles
Idiomas disponibles
FR
7. Maintenance
ES
PT
IT
PL
a)
To prevent accidents, always unplug the saw from the power source before
UA
using compressed air. Always wear safety goggles when using compressed air. If
compressed air is not available, use a brush to remove dust and chips from the saw.
RO
b)
Motor ventilation vents and switch levers must be kept clean and free of
foreign matter. Do not attempt to clean by inserting pointed objects through open-
GR
ings.
c)
Never use any caustic agents to clean plastic parts. Such as: gasoline, carbon
EN
tetrachloride, chlorinated cleaning solvents, ammonia and household cleaners
containing ammonia. Do not use any of these to clean the saw.
d)
Have an authorized service center examine and/or replace the worn carbon
brushes in the event of excessive parking.
e)
Blades become dull even when cutting regular lumber, a sure sign of a dull
blade is the need to force the saw forward instead of guiding it while making a cut.
Take the blade to a service center for sharpening.
f)
Keep the machine clean all the time.
g)
If you discover any damage, consult the exploded drawing and parts list to
determine exactly which replacement part you need to order from our customer
service department.
h)
thoroughly afterwards.
i)
If the supply cord of this power tool is damaged, it must be replaced by
a
tive technician.
j)
This supply cord is type X attachment, method of attachment of the supply
cord such that any replacement is intended to be made by the manufacturer, its
Disconnect the machine from the power supply before removing any
electrical covers.
Clean the housing only with a damp cloth. Do not use any solvents! Dry
171
-
Publicidad
