GreenWorks STG304 Manual Del Operador página 4

1 Description......................................... 4
1.1 Purpose.............................................................. 4
1.2 Overview........................................................... 4
1.3 Packing list........................................................ 4
2 Important safety instructions...........4
3 Symbols on the machine................... 5
4 Risk levels...........................................6
5 Service................................................ 6
6 Environmentally safe battery
disposal............................................... 6
7 Proposition 65.................................... 6
8 Installation......................................... 7
8.1 Unpack the machine.......................................... 7
8.2 Attach the guard.................................................7
8.3 Assemble the shaft.............................................7
8.4 Attach the auxiliary handle................................7
8.5 Install the battery pack.......................................7
8.6 Remove the battery pack................................... 7
9 Operation........................................... 7
9.1 Start the machine............................................... 7
English
9.2 Stop the machine............................................... 7
9.3 Adjust the length of the cutting line.................. 7
9.4 Adjust the length of the cutting line
manually............................................................ 8
9.5 Change to the edging mode............................... 8
9.6 Pivoting Head Function .................................... 8
9.7 Operation tips.................................................... 8
9.8 Cutting tips........................................................ 8
10 Maintenance.......................................8
10.1 General information...........................................8
10.2 Clean the machine............................................. 9
10.3 Replace the spool...............................................9
10.4 Replace the cutting line..................................... 9
11 Transportation and storage.............. 9
11.1 Move the machine............................................. 9
11.2 Store the machine.............................................. 9
12 Troubleshooting................................. 9
13 Technical data.................................. 10
14 Limited warranty............................ 11
15 Exploded view..................................12
3
EN