Installing The Batteries - Canon SPEEDLITE 220EX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installing the Batteries

Use four size-AA batteries.
Recycling Time and Flash Count
Battery Type
Size-AA alkaline batteries
Based on a new set of batteries and Canon's testing standards.
To avoid overheating and degrading the flash head, do not fire more than
20 continuous flashes. After 20 continuous flashes, allow a rest time of at
least 10 min.
Use a new set of four batteries of the same brand. When replacing the
batteries, replace all four at one time.
Using size-AA batteries other than the alkaline type may cause improper
battery contact due to the irregular shape of the battery contacts.
Size-AA Ni-MH or lithium batteries can also be used.
6
Open the cover.
1
Slide the battery compartment cover
as shown by the arrow, then flip up
the edge.
Insert the batteries.
2
Make sure the + and - battery
contacts are properly oriented as
shown in the compartment.
Close the cover.
3
Push down the cover and slide it
back.
Recycling Time
Approx. 0.1 - 4.5 sec.
Flash Count
Approx. 250 - 1700

Publicidad

Tabla de contenido
loading

Tabla de contenido