Nuova Simonelli prontobar Manual De Instrucciones página 51

EN
• VOLUME CC (used to set the volume of water
in the coffee)
• PRE-BREWING (used to set the time of the
preinfusion cycle)
• TAMPING (used to enable/disable pressing)
List of the functions that can be programmed for the
CAFFELATTE beverage:
• GRIND TIME (used to set the grinding time
of the right-hand grinder)
• GRIND TIME (used to set the grinding time
of the left-hand grinder)
• SELECT GRINDER (used to set the default
grinder)
• VOLUME CC (used to set the volume of water
in the coffee)
• PRE-BREWING (used to set the time of the
preinfusion cycle)
• TAMPING (used to enable/disable pressing)
• MILK TIME (used to set the milk time/amount)
• NO AIR TIME (used to set the milk time/amount
without foam)
• AUTOWASHING (used to set the washing time
at the end of pouring)
List of the functions that can be programmed for the
COFFEE MILK beverage:
• GRIND TIME (used to set the grinding time
of the right-hand grinder)
• GRIND TIME (used to set the grinding time
of the left-hand grinder)
• SELECT GRINDER (used to set the default
grinder)
• VOLUME CC (used to set the volume of water
in the coffee)
• PRE-BREWING (used to set the time of the
preinfusion cycle)
• TAMPING (used to enable/disable pressing)
• MILK TIME (used to set the milk time/amount)
• NO AIR TIME (used to set the milk time/amount
without foam)
• AUTOWASHING (used to set the washing time
at the end of pouring)
List of the functions that can be programmed for the
MACCHIATO beverage:
• MILK TIME (used to set the milk time/amount)
• NO AIR TIME (used to set the milk time/amount
without foam)
• AUTOWASHING (used to set the washing time
at the end of pouring)
• GRIND TIME (used to set the grinding time
of the right-hand grinder)
• GRIND TIME (used to set the grinding time
of the left-hand grinder)
• SELECT GRINDER (used to set the default
grinder)
• VOLUME CC (used to set the volume of water
in the coffee)
• PRE-BREWING (used to set the time of the
preinfusion cycle)
• TAMPING (used to enable/disable pressing)
List of the functions that can be programmed for the
MILK beverage:
• MILK TIME (used to set the milk time/amount)
• NO AIR TIME (used to set the milk time/amount
without foam)
• WASH (used to set the washing time at the end
of pouring)
GRINDER PROG. Grinding time of the right-
hand grinder:
It is possible to set the grinding time in seconds and
therefore, the amount of ground coffee used.
Pressing ENTER it is possible to enter the sub
menu; the keys are used to increase/
reduce grinding time.
Press ENTER to confirm settings.
49