Publicidad
Idiomas disponibles
Idiomas disponibles
GRIND TIME
Grinding time of the left-hand
grinder:
It is possible to set the grinding time in seconds and
therefore, the amount of ground coffee used.
Pressing
ENTER
it is possible to enter the sub
menu; the
keys are used to increase/
reduce grinding time. Press
settings.
SELECT GRINDER Default Grinder Selection
It is possible to set the default grinder (the left SX
or the right DX ).
Pressing
ENTER
it is possible to enter the sub
menu; the
keys are used to select the right
or left grinder.
Press
ENTER
to confirm settings.
VOLUME
CC.
(Water
Volume):
It is possible to set the volume of the water for the
coffee in cc.
Pressing
ENTER
it is possible to enter the sub
menu; the
keys are used to increase/
reduce water volume.
Press
ENTER
to confirm settings.
PRE-BREWING
(Preinfusion
It is possible to enable/disable the preinfusion cycle
(YES or NO).
Pressing
ENTER
it is possible to enter the sub
menu; the
keys are used to increase/
reduce pre-infusion
time.
Press
ENTER
to confirm settings.
TAMPING (Pressing):
It is possible to enable/disable pressing (YES or NO).
Pressing
ENTER
it is possible to enter the sub
menu; the
keys are used to select YES or
NO to enable/disable pressing.
Press
ENTER
to confirm settings.
50
ENTER
to confirm
time):
MILK TIME (Milk Time):
It is possible to set the time and therefore, the
amount of milk.
Pressing
ENTER
it is possible to enter the sub
menu; the
keys are used to increase/
reduce the amount of milk. Press
confirm settings.
NO AIR TIME (Air Time disabled):
It is possible to set the part of total milk time in which
the air solenoid is closed so as to adjust the amount
of foam in the milk.
Pressing
ENTER
it is possible to enter the sub
menu; the
keys are used to increase/
reduce the milk time for which the solenoid valve
is closed.
Press
ENTER
to confirm settings.
WASH (Automatic milk tube wash):
It is possible to set the cold water washing time at the
end of milk dispensing.
Pressing
ENTER
it is possible to enter the sub
menu; the
keys are used to increase/
reduce the washing time.
Press
ENTER
to confirm settings.
HOT WATER (Hot Water time):
When pressing the
after key 6, you will access to the HOT WATER
menu.
Pressing
ENTER
it is possible to enter the sub
menu; the
keys
decrease the time and therefore the volume of water.
Reading 000 corresponds to disabled key.
Press
ENTER
to confirm settings.
STEAM (Steam Time):
Pressing
key from the cycle menu will open the
STEAM cycle; press ENTER
EN
ENTER
to
key in the DOSE menu,
are used to increase/
to open the sub-
Publicidad
