Klarstein Trifecta Domino Manual De Instrucciones página 27

All manuals and user guides at all-guides.com
CONNECTING GAS LINE
The gas connection between the gas meter and the cooker can be made of metal
bellows or rubber hose for gas, and the length should not exceed 1.5m. For kitchen
appliances that require a sterilizer, oven, microwave oven, etc. underneath the cooker,
metal bellows must be used and the connecting tube must be fixed.
Gas cookers that use LPG liquefied petroleum gas should be connected by gas rubber
hose.
• The use of a rubber hose connection requires a universal air inlet connection.
• The two ends of the gas hose are connected to the cooker and the indoor gas valve
(the inner diameter of the gas hose is 9.5mm).
• Make sure that the gas hose is not squeezed, twisted or bent by other items. After
the connection is completed, gas leak detection should be performed.
• Do not expose the gas hose to high temperatures.
• It is recommended that you perform a regular air tightness check on the gas cooker
every year.
• Always check that the gas rubber hose is in good condition, with or without aging,
cracks, and regular replacement.
Gas cookers using natural gas and artificial gas should be connected using metal
bellows.
• Metal bellows meet the following requirements:
CJ/T197-2010
• Please install in strict accordance with the installation method and procedure of the
"Gas Stainless Steel Flexible Special Connection Pipe" package insert.
• Do not expose the gas hose to high temperatures.
• Gas leak detection should be performed after the connection is completed.
Clamp
Universal air
inlet connector
Red line
EN
27