Publicidad
Idiomas disponibles
Idiomas disponibles
SV 3000
When you have finished ironing, when you clean the
•
appliance, when you fill or empty the water tank and
also when you leave the iron even for a short while: set
the steam control to position O, put the iron on its
heel and remove the mains plug from the wall socket.
FILLING WATER
1. Before filling water, please pull out the plug first.
2. Set the steam control to the minimum position.
3. Pull down the cover of water filling mouth, and then fill water. Water tank is 450ml capacity
SPRAYING
Press the spraying button, water will be sprayed out from the spraying nozzle. At that time, you should
keep enough water in the water tank.
STEAM IRONING
1. Use steam ironing, turn the steam control to minimum position and set the temperature control at
the ".", ".." or "..." position.
2. After the indicator goes out, turn the steam control to the suitable position, steam will be sprayed,
ironing can start.
BURSTING STEAM
This function proportions extra steam for eliminating wrinkles.
- Press the steam blast button. Wait a few seconds until vapour penetrates
the fibres of the garment before pushing the button again. For optimum steam
quality, do not apply more than three successive blasts.
- The spray button has to be pressed repeatedly to release the first spray
All manuals and user guides at all-guides.com
12
Publicidad
