Orbegozo SV 3000 Manual De Instrucciones página 13

SV 3000
DRY IRONING
Turn the steam control to minimum position, set the temperature control to the suitable position, you
can dry ironing.
SELF CLEANING
It is important to self-clean the appliance at least once a month to remove calcium and any other built-up
minerals inside the iron.
- Fill the water tank up to half with water
- Place the iron in a vertical position, plug in to the mains and select the
maximum temperature.
- Leave the appliance to heat up until the pilot light indicates that it has reached
its consigned temperature.
- Unplug the appliance and place in the sink.
- Press the self-clean button, and keep it pressed down.
- Let the water flow out through the steam vents in the base, while lightly
shaking the appliance.
- Release the button after a minute or when the tank becomes empty.
- Leave the iron in the vertical position until it has cooled.
CERAMIC SOLEPLATE
1. Always unplug the device and let it cool down completely before
2. To remove build up scales in the steam holes, use a cotton wool tip
moistened with mild descaling solution.
3. To avoid damage to the soleplate, never use any sharp object or metal
utensil to scrap the soleplate
4. Use a soft damp cloth to clean the housing of the device
STORAGE
After using, pull out the plug, pour out the remaining water, turn the steam control to minimum, turn
the temperature control to "min", let the iron cool down, put the iron on the safe and dry place vertically.
MAIN TECHNICAL PARAMETERS
Appliance
SV 3000
All manuals and user guides at all-guides.com
Voltage
230 V (~)
Frequency
50Hz
Power
3000 W
13