Pur Line HEATY B1200 Manual De Usuario página 14

OPERATION
PARTS
1 2
USE
1. Plug the appliance into a mains socket.
2. Pull the chain switch once for low heating level, pull it twice for high heating level.
3. To switch off the appliance, pull the chain switch again and unplug the appliance from the socket.
Unplug the appliance when not in use.
0
Appliance switched off
1
Heating level 1 [600W]
2
Heating level 2 [1200W]
NOTE: It is normal that when the heaters are turned on for the first time or when they are switched on after not
having been used for a long period of time the heaters may emit some odour and fumes. This will disappear
when the heater has been on for a short time.
3
12
1. Aluminium housing
2. Heating tubes
3. Pull cord switch